INSTALLATION INSTRUCTIONS
STEP 1:
Use the following pictures to assemble your Flexible Fuel Lines.
Click on each picture to enlarge.
Click on each picture to enlarge.
|
|
STEP 2:Using the photos below, test your pre-cut hoses in the correct configurations and trim as needed.
The blue fitting in the bottom left of this photo is the bottom rail of the Fuel Filter Kit (SFS 00K).
|
|
If you have fuel pumps in a box, see above.
If you have the new fuel pumps not in a box, see below.
If you have the new fuel pumps not in a box, see below.
Trim the 90-degree corner on the nose gear box angle to 45-degrees as shown below. This gives the clearance needed for the fuel line to gascolator.
The above picture shows the longer hose.
The below picture shows the shorter hose.
Intercooler bracket shown clecoed in position.
NOTE: Be sure you have clearance to mounting bracket.
The below picture shows the shorter hose.
Intercooler bracket shown clecoed in position.
NOTE: Be sure you have clearance to mounting bracket.
|
This photo shows the left-hand side fuel rail hose running across the top of the engine mount (Longest hose).
|
This photo shows the right-hand side fuel rail hose routing (second longest hose).
|
