- Zenith 750 w/ 915 (✔)
- >
- Oil and Water Radiators and Mounting Kit
Oil and Water Radiators and Mounting Kit
SKU:
SFF/O 20K5is
$1,980.00
$1,980.00
Unavailable
per item
This kit includes your water radiator, oil radiator, and the items required to install them onto your 915/916 engine.
INSTALATION INSTRUCTIONS
STEP 1
Connect the two upper oil radiator arms to the engine gearbox (pictures below) using shorter bolts and lock washer. The longer one goes to the Rh side of the engine. Install the two stainless end brackets in the oil radiator after installing the anchor nuts in them. They are held in with the black screws which have a lock washer and a regular washer under the head. The nut plates with rubber are used as nuts on the inside of the radiator. Ensure rubber is placed towards the screw head. Do not tighten until it is fit to nose bowl.
STEP 2
Install the two lower oil radiator and water radiator brackets to the gear box on each side as per pictures below. They use the longer bolts with lock washers. Lh side shown below.
Rh side shown below. Note bump or joggle in Rh side water radiator mounting bracket to clear oil lines.
Install water radiator with last bracket. Be sure to use lock washers on radiator bolts.
Water and oil radiators are now installed. Be sure to tighten fasteners once they have been positioned and fit to nose bowl.