SS Zenith 701 and 750 Tow-bar Attachment Bracket (Radius Mount)

SKU: SF 20R
$45.99
$45.99
Unavailable
per item
No need to drill holes in your nose-wheel strut! Use existing holes and bolts to attach our towbar attachment bracket; Just that simple! You will be happy to know that you haven't damaged or weakened your strut. This tow-bar mount is made to fit Zenith or Cessna built tow-bars which are affordable and readily available.
Note: The tow-bar attachment bracket only comes with one hole in order to ensure proper alignment. See installation instructions for details on how to drill the second hole.

INSTALLATION INSTRUCTIONS:

Step 1.

Remove the two front fork mounting bolts on your aircraft.

Step 2.

Attach the tow-bar mounting bracket on top of the nose gear strut and secure with one bolt. ​Yes, the tow-bar attachment bracket only comes with 1 hole. This is to ensure proper alignment to the hole spacing on your nose gear strut. We found this spacing to vary depending on the aircraft.

Step 3.

Using a scribe or fine pen, mark the location of the opposing hole on the tow-bar attachment bracket. Then remove the bracket.

Step 4.

Drill the bracket in the marked location. Then re-install the tow-bar attachment bracket using both bolts.
See product photos for final installed result.